|
|
|
 |
Waterboy General Information
Waterboy HSTP-10 - Membrane Technology - Waterboy Specs |
|
 |
The Waterboy HSTP-10 is a Sewerage Treatment Plant using cost-effective membrane technology
Our treatment plants use multi-stage bioreactors and advanced membrane technology, theWaterboy HSTP-10 can treat waste Black or Grey water to a quality that can be defined in Queensland as advanced Secondary Effluent Standard (ASES). Recycle Water Solutions is the only HSTP in Queensland to have achieved that standard.
The advantages associated with the waterboy HSTP-10, are as follows...
No trenches...
Superior design...
Large built-in surge capacity for extra guests...
Many water re-use options available...
PLC computer control… |
The ultimate replacement for failing septics or for waste sewage treatment at source... |
Waterboy is the first HSTP in Australia to use membranes, and takes water to a standard many times better than any other system in Australia, and the first of its design in the world.
Given the quality of the treated effluent from the Waterboy HSTP-10, it is now possible to recycle treated water for such uses as:
Toilet flushing, Car washing, Hosing paths etc.
Fully installed and commissioned by Recycle Water Solutions licensed service Providers |
 |
Waterboy Specifications
Tanks are manufactured from tough rotomoulded polyethylene plastic. |
Outer tank wall thickness
Inner tank walls thickness
Diameter OD
Side wall Height
Total Height
Control Panel
Weight |
15mm
10mm
2,040mm
2,345mm
2,865mm
400mm X 400mm X 200mm deep
With Blue alarm strobe on top
Approximate 550kg |
|
Waterboy HSTP-10 - Membrane Technology - Waterboy Specs |
|
|
|
|
|
|
|
|
|
|
